if you want to remove an article from website contact us from top.

    the smallest division on the main scale of a vernier calipers is 0.1 cm. ten divisions of the vernier scale correspond to nine divisions of the main scale. the figure below on the left shows the reading of this calipers with no gap between its two jaws. the figure on the right shows the reading with a solid sphere held between the jaws. the correct diameter of the sphere is

    Mohammed

    Guys, does anyone know the answer?

    get the smallest division on the main scale of a vernier calipers is 0.1 cm. ten divisions of the vernier scale correspond to nine divisions of the main scale. the figure below on the left shows the reading of this calipers with no gap between its two jaws. the figure on the right shows the reading with a solid sphere held between the jaws. the correct diameter of the sphere is from screen.

    The smallest division on the main scale of a Vernier calipers is 0.1 cm. Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is

    The smallest division on the main scale of a Vernier calipers is 0.1 cm. Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is

    Home >

    The smallest division on the main scale of a Vernier calipers is 0.1 cm. Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is

    Question

    The smallest division on the main scale of a Vernier calipers is

    0.1 cm

    . Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is

    A 3.15 cm B 3.07 cm C 3.17 cm D 3.11 cm Solution

    The correct option is A

    3.15 cm So, we have given, 10 V S D = 9 M S D ⇒ 1 V S D = 9 10 M S D Least count = 1 M S D − 1 V S D = ( 1 − 9 10 ) M S D ⇒ 0.1 M S D = 0.1 × 0.1 = 0.01 cm As ′ 0 ′

    of vernier scale lies before

    ′ 0 ′ of the main scale, Zero error = − ( 10 − 6 ) × ( Least Count ) = − 4 × 0.01 = − 0.04 cm Reading = 3.1 + 1 × ( Least count ) = 3.1 + 1 × 0.01 = 3.11 cm

    Therefore, true diameter

    = Reading − Zero error = 3.11 − ( − 0.04 ) = 3.15 cm PhysicsStandard XII Suggest Corrections 6

    SIMILAR QUESTIONS

    Q. A vernier caliper has no zero error, one main scale division =

    1 mm and 9

    main scale division =

    10

    vernier scale divisions. A spring is held between jaws without exerting force on jaws. Main scale reading is

    3.4 cm

    , and 5th vernier scale division coincides with a main scale division. When jaws are pressed by force of

    10 N

    on both sides, main scale reading remains

    3.4 cm

    , but 1st division of vernier scale coincides with a main scale division. Now spring is removed, cut into two pieces and when inserted between jaws without any force, main scale reading =

    1.1 cm

    and 5th vernier scale division coincides with a main scale. If we apply force of

    30 N

    on both the jaws, main scale reading gets

    1.0 cm and x

    vernier scale division coincides with a main scale division. Find

    ′ x ′ .

    Co-CurricularsStandard XII

    Q.

    The vernier of a vernier scale is divided into 10 divisions which coincide with 9 divisions of the main scale, each main scale division being 0.5 mm. When the two jaws of the instrument are in contact with each other, the 4th division of the vernier scale coincides with a main scale division and the zero of the vernier lies to the right of the zero of the main scale. When a sphere is inserted between the jaws, the zero of vernier scale lies slightly to the right of 1.8 cm and the sixth vernier division coincides with a main division. The diameter of sphere will be

    Co-CurricularsStandard XII

    View More

    स्रोत : byjus.com

    The smallest division on the main scale of a Vernier calipers is 0.1 cm. Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is

    JEE Advanced 2021: The smallest division on the main scale of a Vernier calipers is 0.1 cm. Ten divisions of the Vernier scale correspond to nine divi

    Q. The smallest division on the main scale of a Vernier calipers is 0.1cm. Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is

    2731  46 JEE AdvancedJEE Advanced 2021

    Least count =(1−

    Report Error Solution: 10 9 ​ )(0.1)=0.01cm

    Zero error =−0.1+0.06=−0.04cm

    Final reading =3.1+0.01×1=3.11cm

    So correct measurement =3.11+0.04=3.15cm

    NEET 2022 Physics Questions

    NEET 2022 Physics Questions Two objects of mass 10kg and 20kg respectively are connected to the two ends of a rigid rod of length 10m with negligible mass. The distance of the center of mass of the system from the 10kg mass is :

    NEET 2022

    Choose the correct answer from the options given below:

    NEET 2022

    The energy that will be ideally radiated by a 100kW transmitter in 1 hour is :

    NEET 2022

    Plane angle and solid angle have :

    NEET 2022

    An ideal gas undergoes four different processes from the same initial state as shown in the figure below. Those processes are adiabatic, isothermal, isobaric and isochoric. The curve which represents the adiabatic process among 1,2,3 and 4 is :

    NEET 2022

    In half wave rectification, if the input frequency is 60Hz, then the output frequency would be:

    When two monochromatic lights of frequency, v and

    NEET 2022 2 v ​

    are incident on a photoelectric metal, their stopping potential becomes

    2 V S ​ ​ and V S ​

    respectively. The threshold frequency for this metal is :

    The displacement-time graphs of two moving particles make angles of 30

    NEET 2022 ∘ and 45 ∘

    with the x-axis as shown in the figure. The ratio of their respective velocity is :

    The dimensions [MLT

    NEET 2022 −2 A −2 ] belong to the : NEET 2022

    The peak voltage of the ac source is equal to:

    The ratio of the distances travelled by a freely falling body in the 1

    NEET 2022 st ,2 nd ,3 rd and 4 th second : NEET 2022

    A body of mass 60g experiences a gravitational force of 3.0N, when placed at a particular point. The magnitude of the gravitational field intensity at that point is :

    In the given nuclear reaction, the element X is:

    NEET 2022 11 22 ​ Na→X+e + +v NEET 2022

    If a soap bubble expands, the pressure inside the bubble:

    NEET 2022

    Two resistors of resistance, 100Ω and 200Ω are connected in parallel in an electrical circuit. The ratio of the thermal energy developed in 100Ω to that in 200Ω in a given time is :

    Two hollow conducting spheres of radii R

    NEET 2022 1 ​ and R 2 ​ (R 1 ​ ≫>R 2 ​

    ) have equal charges. The potential would be:

    The angular speed of a fly wheel moving with uniform angular acceleration changes from 1200rpm to 3120rpm in 16 seconds. The angular acceleration in rad/sWhen light propagates through a material medium of relative permittivity ϵ

    NEET 2022 2 is : NEET 2022 r ​

    and relative permeability μ

    r ′ ​

    the velocity of light, v is given by : (c - velocity of light in vacuum)

    NEET 2022

    A long solenoid of radius 1mm has 100 turns per mm. If 1A current flows in the solenoid, the magnetic field strength at the centre of the solenoid is :

    NEET 2022

    A shell of mass m is at rest initially. It explodes into three fragments having mass in the ratio 2:2:1. If the fragments having equal mass fly off along mutually perpendicular directions with speed v, the speed of the third (lighter) fragment is :

    NEET 2022

    As the temperature increases, the electrical resistance :

    NEET 2022

    A biconvex lens has radii of curvature, 20cm each. If the refractive index of the material of the lens is 1.5, the power of the lens is :

    Given below are two statements :

    NEET 2022

    Statement I : Biot-Savart's law gives us the expression for the magnetic field strength of an infinitesimal current element (IdI) of a current carrying conductor only. Statement II : Biot-Savart's law is analogous to Coulomb's inverse square law of charge q, with the former being related to the field produced by a scalar source, Idl while the latter being produced by a vector source, q.

    In light of above statements choose the most appropriate answer from the options given below:

    NEET 2022

    A square loop of side 1m and resistance 1Ω is placed in a magnetic field of 0.5T. If the plane of loop is perpendicular to the direction of magnetic field, the magnetic flux through the loop is :

    NEET 2022

    An electric lift with a maximum load of 2000kg (lift+ passengers) is moving up with a constant speed of 1.5ms

    स्रोत : tardigrade.in

    The smallest division on the main scale of a vernier calipers is 0.1cm. Ten divisions of the vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between in two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is.

    The smallest division on the main scale of a vernier calipers is 0.1cm. Ten divisions of the vernier scale correspond to nine divisions of the main scale. The

    Home > English > Class 12 > Physics > Chapter > Jee Advanced 2021 >

    The smallest division on the m...

    The smallest division on the main scale of a vernier calipers is 0.1cm. Ten divisions of the vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between in two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is.

    Updated On: 27-06-2022

    Get Answer to any question, just click a photo and upload the photo and get the answer completely free,

    UPLOAD PHOTO AND GET THE ANSWER NOW!

    Text Solution Open Answer in App A 3.07 cm B 3.11 cm C 3.15 cm D 3.17 cm Class 12 Class 11 Class 10 Class 9 Class 8 Class 7 Class 6

    CHAAYA PRAKASHINI (BENGALI)

    NCERT FINGERTPS ENGLISH

    JEE MAINS PREVIOUS YEAR ENGLISH

    HC VERMA ENGLISH

    XII BOARD PREVIOUS YEAR PAPER ENGLISH

    XII BOARD PREVIOUS YEAR PAPER ENGLISH

    NCERT EXEMPLAR ENGLISH

    KUMAR PRAKASHAN OSWAAL PUBLICATION MTG-WBJEE

    RESNICK AND HALLIDAY

    DISHA PUBLICATION MODERN PUBLICATION MODERN PUBLICATION FULL MARKS

    KCET PREVIOUS YEAR PAPERS

    CBSE COMPLEMENTARY MATERIAL

    TS EAMCET PREVIOUS YEAR PAPERS

    NTA MOCK TESTS SUBHASH PUBLICATION CHHAYA PUBLICATION MARVEL PUBLICATION

    VIKRAM PUBLICATION ( ANDHRA PUBLICATION)

    AIIMS PREVIOUS YEAR PAPERS

    XII BOARDS PREVIOUS YEAR

    XII BOARDS PREVIOUS YEAR

    JEE MAINS PREVIOUS YEAR

    JEE ADVANCED PREVIOUS YEAR

    NCERT EXEMPLAR NDA PREVIOUS YEARS HC VERMA

    SUNIL BATRA (41 YEARS IITJEE PHYSICS)

    NEET PREVIOUS YEAR (YEARWISE + CHAPTERWISE)

    DC PANDEY CENGAGE PHYSICS A2Z PRADEEP

    IE IRODOV, LA SENA & SS KROTOV

    CP SINGH NCERT FINGERTIPS DISHA ERRORLESS KVPY PREVIOUS YEAR

    PHYSICS GALAXY - ASHISH ARORA

    NN GHOSH D MUKHERJEE SL ARORA BITSAT GUIDE

    MHTCET PREVIOUS YEAR PAPERS AND PRACTICE PAPERS

    SUNSTAR PUBLICATION

    CENGAGE PHYSICS ENGLISH

    MBD PUBLICATION HC VERMA HC VERMA DC PANDEY ENGLISH UNITED BOOK HOUSE CHETANA PUBLICATION PSEB

    VGS PUBLICATION-BRILLIANT

    NARAYNA BANSAL NCERT ENGLISH NCERT VIRAJ PUBLICATION NCERT GUJARATI NCERT

    NCERT FINGERTIPS HINDI

    ARIHANT HINDI ERRORLESS HINDI

    GRB PUBLICATION HINDI

    BIHAR BOARD- PREVIOUS YEAR PAPER

    TRIPUTI PUBLICATION

    UPTU PREVIOUS YEAR PAPER

    CGPET PREVIOUS YEAR PAPERS

    NEET PREVIOUS YEAR

    JEE Main & Advanced (Hindi Medium)

    SCIENCE PUBLICATION MITTAL PUBLICATION SANJEEV PUBLICATION YUGBODH

    SHIVLAAL PUBLICATION

    NAVBODH

    MP BOARD - PREVIOUS YEAR PAPERS

    HARYANA BOARD - PREVIOUS YEAR PAPERS

    PRABODH PUBLICATION

    RAJASTHAN BOARD PREVIOUS YEAR

    CHATTISGARH BOARD PREVIOUS YEAR

    HC VERMA HINDI NOOTAN HINDI BALAJI PUBLICATION BHARATI BHAWAN NDA PATHFINDER

    BIHAR BOARD- PREVIOUS YEAR PAPER

    NTA MOCK TESTS

    ARIHANT PUBLICATION CHHATISGARH

    ARIHANT PUBLICATION BIHAR

    ARIHANT PUBLICATION UP

    BANSAL HINDI

    NCERT EXEMPLAR HINDI

    AGRAWAL EXAM CART BIHAR

    ARIHANT PUBLICATION MP

    S CHAND STUDENTS FRIENDS

    JHARKHAND BOARD PREVIOUS YEAR PAPERS

    NCERT HINDI

    SURA PUBLICATION(TAMIL)

    NCERT TAMIL Answer

    Step by step solution by experts to help you in doubt clearance & scoring excellent marks in exams.

    Click here to get PDF DOWNLOAD for all questions and answers of this chapter - JEE ADVANCED PREVIOUS YEAR Class 12 JEE ADVANCED 2021

    Click here to get PDF DOWNLOAD for all questions and answers of this Book - JEE ADVANCED PREVIOUS YEAR Class 12 PHYSICS

    Related Videos

    643180612 0 3.0 K 7:25

    The main scale of a vernier calipers reads

    10mm 10mm in 10 10

    divisions. Ten divisions of vernier scale coincide with nine divisions of the main scale. When the two jaws of the calipers touch each other, the fifth division of the vernier coincides with

    9 9

    main scale divisions and zero of the vernier is to the right of zero of main scale, when a cylinder is tighty placed between the two jaws, the zero of the vernier scale lies slighty to the left of

    स्रोत : www.doubtnut.com

    Do you want to see answer or more ?
    Mohammed 2 month ago
    4

    Guys, does anyone know the answer?

    Click For Answer